MLS-1O4F-P is an Industrial 802.3at/af PoE+ Fiber Switch, providing Power over Ethernet capability and non-blocking wire-speed Fast Ethernet performance in harsh industrial environment. It provides 4 port 10/100Base-T copper with 802.3af/at PoE injector and also provide one Combo Port (UTP/SFP) for uplink to data-center. The MLS-1O4F-P design for Industrial like function like redundant power input, Uplink fault detection for NO output, also can using fiber-GBIC for Fiber link without Media convert design.
The MLS-1O4F-P is well suited for applications in deploying surveillance system, and security control and wireless service in climatically demanding environments with wide temperature range from -10 to 60 degrees C.
High Power PoE for Security and Public Service Applications
To fulfill the demand of High Power PoE for network applications with Megabit speed transmission under wide temperature, the MLS-1O4F-P provides 4 10/100Mbps ports featuring both IEEE 802.3af and IEEE 802.3at Power over Ethernet Plus (PoE+) that combine up to 30 watts of power output and data per port over one Cat.5E / 6 Ethernet cable.
With totally 60-watt PoE budget on the whole system, the MLS-1O4F-P is designed specifically to satisfy the growing demand of higher power consuming network PD (powered devices) such as PTZ (Pan, Tilt & Zoom) / Speed Dome network cameras, multi-channel (802.11a / b / g / n) outdoor wireless LAN access points and other PoE network devices by providing double PoE power, rather than the current conventional 802.3af PoE.
- TP port Support MDI/MDIX auto-crossover function.
- TP port Support 10/100Base-T Auto-negotiation.
- Support Max packet size 1552 byte.
- Provide 4 PoE ports can transfer data via a single cable and power, also compatible IEEE802.3af/at each Port.
- Support Power fading protect like OVP and OCP.
- Uplink port provides one set of Combo Port (SFP fiber and UTP) two kinds of interfaces to meet the 100M Cat5e/Cat6 cable or fiber connection capacity without Media convert.
- Design DIP switch setting for Uplink fault detection output.[Fault Open/ Normal Close],
- Design for redundant power input, also can upgrade totally PoE budget to 120 Watt.